Ediz. 005 - 09/2015
www.larius.eu
DALì LINER PLUS
18
TOP UP HYDRAULIC OIL
With each start up, check the hydraulic oil level by looking through
the gauge (
L1) on the side of the; If necessary, use
“AGIP OSO
46 type hydraulic oil” to top up the level.
L1
REPLACING HYDRAULIC OIL
After operating for 100 hours, replace the oil in the pump;
• Discharge the waste oil through the plug (
L4) fitted at the
bottom of the pump casing.
• Clean the seals on the cap and replace it if worn.
• Clean the filter (
L6).
• Clean and, if necessary, replace the worn seals (
L6).
• Fill the pump with the recommended oil until it reaches the
maximum level the plug (
L5).
• Then, substitute the oil every 250 hours.
L5
L6
L4
L5
Summary of Contents for DALI LINER PLUS HAND PUSH
Page 2: ......
