Edit. 03 - 06/2019
www.larius.eu
CH 200 AD
14
•
Adjust the powder diffusion range of the spray gun using
the knob (
H21
) and reading the value expressed in bar on
the pressure gauge (
H22
), (recommended values 0.5-2 bar);
however, this value must always be less than the supply
air pressure (pressure gauge
H23
); once adjustment is
complete, release the spray gun trigger.
•
Adjust the flow of the additional air that controls the clean-
ing of the diffuser and charging rheophore. Using the knob
(
H24
) and checking the pressure gauge (
H25
) set the outlet
air pressure to the recommended values between 0.5-1 bar.
Depending on the amount of powder delivered, ensure the
cleaning cone cleans the powder residue from the affected
areas.
•
Using the potentiometer (
H26
) select the desired voltage
value (0 -100 kv) read the set value on the digital display
(
H27
).
Protect the spray gun from all violent mechanical
action. Repeated impacts and shocks of consider-
able intensity, while not altering the outer integrity
of the spray gun, may cause internal damage and
cause the spray gun to become unusable.
•
Point the spray gun at the object to be painted (recom-
mended distance 15-20 cm) and press the trigger, which
will start to deliver powder, as well as high voltage; the
value of current, expressed in microamperes (max 250 µA)
can be read on the lit indicator (
H3
).
H29
H30
H31
H24
H26
H28
H32
H23
H25
H27
