9
ENGLISH
ImpORTANT SAFEGUARDS
The «CLICK» sound you hear when ironing derives from the anti drip feature. This is a
normal sound.
Your product is designed suitable for tap water usage. In first use, before ironing, evaporate
twice by filling tap water. Meanwhile, use the shock button frequently. Thus, the vapour
performance will increase and dust particles that perforated in vapour channels in anyway will
be cleaned.
If the water of your area is too limy, we recommend you to use tap water mixed with drinking
water.
In first usage of your iron, a mild smell may be spread. This will return to normal after a few
uses.
If you run out of water while ironing, you can add water after unplugging the electric cable
without waiting.
When the spray don't spray water, in order to remove the possible clogging press the spray
button a few times while closing the spray hole with your finger.
During ironing, first iron the clothes that require low temperature and then iron the ones that
require high temperature. If the heat adjustment is decreased when in high temperature, you
should wait about 3-4 minutes until the heat decreases to the adjusted level.
Before first use, remove the protective folio beneath the base.
If you observe staining in the base of your iron during ironing, you can clean your iron by
rubbing it directly to the fabric of the ironing table. After ironing is finished and the base of the
iron is cooled down enough, you can clean the iron base by wiping with a vinegar submerged
microfiber or cotton cloth. We recommend this cleaning process to be done once a week on
average depending upon the usage of the iron and after the ironing process just after the base
is cooled down if possible.
Summary of Contents for LR8321
Page 1: ...LR8321 Steam iron Паровой Утюг Парова праска 1 ...
Page 2: ......
Page 65: ......
Page 66: ......
