Laretti LR8321, Manual

Page: 12 / 66

12
ENGLISH
ExpLOITATION
FILLING THE wATER RESERvOIR

Make sure you unplugged the device. Switch off the vapour con-
trol button.

Fill the water reservoir by opening the water filling cap on the
iron and leaning forward the horizontal positioned iron gently in
a way that it won't overflow. When you hold your iron vertically,
take care the water you fill not to pass MAX. line on the transpar -
ent tank of your iron.

Close the water filling cap.

Even if you will iron vapourless; there must be water in the iron
in order to use water spray when needed.

Do not add perfume, vinegar, soda, descaling agents, products helpful for ironing and other
chemicals into the water reservoir.

If the water of your area is too limy, we recommend you to use tap water mixed with drink-
ing water.
ADjUSTING TEmpERATURE

you can adjust the iron base temperature according to your needs by pressing (+) and (-)
buttons located on both sides of the LCD display. Left side of the
LCD display shows adjusted temperature and right side of it shows
the temperature of the iron base. If ironing is to be done with va-
pour, temperature adjustment should be above «••» level.

After plugging your iron, adjust the temperature with tempera-
ture adjustment button according to the fabric type you'll iron.
Hold on until your iron is ready to iron vertically.
1
2