Laretti LR8321, Manual

Page: 20 / 66

20
ENGLISH
pRObLEmS AND SOLUTIONS
The base of the iron is
not heating even though
it's plugged
There may be a connection problem. – Check the plug and the
mains cable.
Temperature adjustment button may be in «•» position. – Increase
the temperature adjustment button to «••» sign.
Iron does not
produce vapour
There may not be enough water in water reservoir. – Fill the water
reservoir until the max. (maks) line.
vapour adjustment button may be in 0 position. – Rotate the
vapour adjustment button to the position with the vapour sign. –
base of the iron may not be hot enough. Water dripping prevention
system «Anti-Drip» may be engaged. Rotate the iron temperature
adjustment button to the position with the vapour sign. Place the
iron vertically and wait for the base to warm up.
Steam burst – vertical
steam function
is not working
These functions may be overused in a very short time. – Keep on
horizontally ironing and wait for a while before using the shock
vapour function again. – base of the iron may not be hot enough.
Rotate the iron temperature adjustment button to the position
with the vapour sign. Place the iron vertically and wait for the
base to warm up.
Water drops on the fabric
You may not have closed water filling cap firmly. – Close the water
filling cap firmly.
Residuals and particles
fall from the base of the
iron when ironing.
If the water you use for your iron is too limy these kind of residuals
may be formed. – Use the descaling function once or a few times.
Next time, use demineralized water in your iron when ironing.