Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 35 / 50

9 REPAIR
9.3 LONG-TERM LUBRICATION
FIBROTOR 35 | 50
9.3
Long-term lubrication
The rotary table is delivered filled with suitable synthetic oil. The gearboxis filled
with synthetic gearbox oil. The lubricants are designed for a service life of at least
20,000 operating hours.
A change in lubricant is only required in the event of coolant and lubricant ingress,
as well as in the event of a general overhaul of the device. Contact our customer
service in this regard.

It is recommendable to thoroughly clean the gearbox when changing the lubricant.
Synthetic and mineral lubricants must not be mixed with
each other.
In the case of ambient temperatures below
– 20°C and
above + 60°C rotary shaft seals with special material quality must be used.
In the case of external reservoirs observe their lubrication
instructions.
9.3.1
Repair
The operator of the rotary table should not perform any overhaul / repair work.
If there is a need of overhaul / repair work, the FIBRO GmbH customer service
must be informed.