Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 26 / 50

5 ASSEMBLY
5.3 ASSEMBLY OF THE ROTARY TABLE
FIBROTOR
26 | 50
Transport the rotary table to the assembly site in compliance with the safety
instructions and transport regulations.
Sagging load. Do not hold between the rotary table and the installation surface.
Crushing of hands or fingers.

Lower the machine carefully and place.

Remove the transport belts.

The type and positions of the connections must be taken from the dimensional
drawing and the electric diagram in the appendix.

The information regarding the type, size and other data for pneumatic, hydraulic,
water and electrical connections must be taken from the diagrams and drawings
enclosed in the appendix.

Check function:

– Functional sequence (see chapter 7.3 Operating modes)

– Measuring system