Lapple FIBRO FIBROTOR VM.NC, Assembly And Operation Manual

Page: 11 / 50

1 INTRODUCTION
1.6 WARRANTY
FIBROTOR 11 | 50
1.5.6
Drive motors
As standard, three-phase servo motors are used as drive motors. Direct current or
hydraulic servo motors can also be used. For individual cases with low precision
requirement the use of three-phase standard motors in conjunction with a
frequency converter is possible.
1.5.7
Measuring system on the motor
In particular in the case of digital servo drives the measuring system is placed
directly on the motor shaft.
The precision and play of the reduction gearbox are included in the measurement
result.
This is only recommendable in relation with mathematically exact gear reduction.
1.6
Warranty
The warranty is regulated by contract (see General Terms and Conditions or
Contract).
1.7
Translation of the Original maintenance and operation manual
This manual is the translation of the original maintenance and operation manual
and is part of the scope of delivery.
This manual describes the operation of the machine and contains important
information about its intended use.
This manual is addressed especially to the personnel that has been trained and
authorised for operating and servicing the machine.
A copy of this manual must be stored and made continuously available at the
operating site of the machine and everyone assigned to work on or with the
machine must read, understand and apply it.
The safety instructions in the individual chapters must be observed.
This manual and the other relevant documents (see Chapter 1.4 Applicable
documents on page 10) are not subject to any modification service.
We reserve the right to update data and drawings in this manual based on further
technical development.
The respectively current version can be requested from the manufacturer.
1.7.1
Legend
Certain marks, symbols and abbreviations with the following meaning are used in
this manual for clear organisation of its contents:
1. indicates an enumeration.
a) indicates the second level of an enumeration.

indicates a listing.

indicates the second level of a listing.