Lapis Roll Laminator PL-LR, User Manual

Page: 5 / 47

General information
Product description
The passport laminator laminates all pages of the passport including the inside of
the cover. A wafer-thin holographic film is applied to the paper surface via a
temperature-controlled heated roller. The laminator can be integrated into an
automatic personalisation system or can function as an independent station. The
passport is fed in from the left, right or front depending on the device
configuration.
Symbols and conventions
The following symbols and conventions are applied in this user manual.
The symbol indicates parts of the device that are hot and should not
be touched.
The symbol indicates important information, which must be
observed. A failure to do so may lead to injuries.
Good advice or information regarding important working steps.
Ready
Text in monospace type indicates contents on the display.
Taste
Framed text corresponds with a key on the control panel.
5
1
1
1