Lapis Roll Laminator PL-LR, User Manual

Page: 25 / 47

Menu: DEVICE / Foil Type
Command: <ESC>K20; p <CR>
Setting the film type.
Setting range:
0 = ohne Indexmarke
1 = mit Indexmarke
Menu: DEVICE / Standby
Command: <ESC>K40; p <CR>
If the laminator is not used for 30 minutes it switches to energy-saving mode.
The temperature of the heated roller drops in this mode. Press to finish.
The energy-saving mode must be active for this!
Setting range:
0 = Standby off
1 = Standby on
CLEAR
DEVICE
Menu: DEVICE / Loop
Command: <ESC>K02; p <CR>
In its switched on status, with the start of lamination the film is drawn taut after
a delay. This can influence the quality at the edge of the document.
Setting range:
0 = Loop off
1 = Loop on
Menu: DEVICE / Delay 1 retract
Stipulates the time between detecting the passport and lowering the rocker.
Setting range:
100...300...10000 ms
Menu: DEVICE / Delay 2 retract
Stipulates the time for which the rocker remains lowered before the document is
drawn in.
Setting range:
100...300...10000 ms
25
4