Lapis Roll Laminator PL-LR, User Manual

Page: 36 / 47

Status query
Function: Status
Command: <ESC>!f<CR>
Delivers detailed information on the current status of the laminator. The status
can be requested at any time.
The response consists of 7 Bytes.
Format: = hh / dd <CR>
hh : Statuscode Hint:
00: READY Device is ready for work
01: WAIT Temperature of heat roller too high / too low
02: BUSY Laminator is active
04: ERROR Errorcode is setting
10: GOT IT Document identified to start lamination
20: LAMI Lamination od Document activ
40: EJECT Ejection of Document activ
dd : Errorcode Hint
00 no Error
dd Errorcode, see chapter “Trouble shooting”
Status bits also occur in combination. E.g. status code “42” means that the
laminator is active and is presently outputting a document.
Function: Alife-Status
Command: <ESC>!r<CR>
Delivers information on the current status of the laminator. The status can be
requested at any time.
The response only consists of 2 Bytes.
Format: d <CR>
d : Statuscode Hint
0 = OK Device is ready for work
1 = WAIT Temperature of heat roller too high / too low
2 = BUSY Laminator is active
3 = ERROR Errorcode is setting
36
5