Lapis Roll Laminator PL-LR, User Manual

Page: 24 / 47

Menu: SETTING / Transport Speed
Command: <ESC>H d <CR>
Setting the transport speed of the document outside of lamination. In order to
carry out a test it is possible to start the motor via .
Setting range:
40...60...80 mm/s
Menu: SETTING / Lamination Length
Command: <ESC>L d <CR>
Setting the lamination range.
Setting range:
115...125...135 mm
Menu: SETTING / Foil Position
Command: <ESC>P d <CR>
With a change in the document intake range, precise placement of the film is
carried out.
With an enlarging of the intake range, the lamination of the document starts later.
Conversely, with a reduction in the intake range lamination starts earlier.
The direction arrows on the display indicate the direction of travel once lamination
starts.
Setting range:
-30...0...+30 x 1/10mm
24
4