Lapis Roll Laminator PL-LR, User Manual

Page: 27 / 47

Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
Reset
Befehl: <ESC>!!<CR>
Der Laminator wird neu resetiert. Der Vorgang entspricht einem Neustart nach
Power On. Nicht im Makro gespeicherte Einstellungen gehen verloren.
27
4
Menü: DEVICE / Admin Password
DEVICE / User Password
In factory state the password protection is inactive (password = 0000). If you
activate a password protection, the user must enter a password to start the
laminator after power on. The Administration-Access without restriction allows
input option of a user password with menu lock.
Keys for entering password:
Arrow key up:
increment the digit
Arrow key down: decrement the digit
Arrow key right:
next digit position
SAVE key: take password
Set new administrator password:
DEVICE/Admin Password/New Password = 1234
Repeat Password = 1234
Change administrator password:
DEVICE/Admin Password/ Old Password = 1234
DEVICE/Admin Password/ New Password = 4321
Repeat Password = 4321
Delete administrator password:
DEVICE/Admin Password/ Old Password = 4321
DEVICE/Admin Password/ New Password = 0000
Repeat Password = 0000
The user password is also cleared, so the password protection is inactive.
Set new user password:
DEVICE/User Password/ New Password = 1111
Repeat Password = 1111
Change user password:
DEVICE/User Password/ Old Password = 1111
DEVICE/User Password/ New Password = 2222
Repeat Password = 2222
Delete user password:
DEVICE/User Password/ Old Password = 2222
DEVICE/User Password/ New Password = 0000
Repeat Password = 0000