5
Apollo-V X1
|
Asennus- ja käyttöohje/Installation and user manual/Monterings och bruksanvisning
KÄYTTÖ
USE
ANVÄNDNING
EN
■
Speed 1 is used for extracting cooking fumes and basic ventilation.
Increase the speed as the fumes become stronger or when more
efficient ventilation is needed. Use maximum speeds only when
necessary.
■
Make sure there is adequate exchanging air from outside in the room
by, for example, opening a window when the hood is in use.
Inadequate ventilation prevents the hood from working properly.
■
The cooking hood can be cleaned with all-purpose kitchen cleaner
which can be purchased at grocery stores. After cleaning, the deter-
gent residues must be removed with a clean, damp cotton cloth (or
similar) that doesn’t scratch the surface. Residues that have not been
properly rinsed and dried may result in changes on the surface of the
cooker hood, e.g. rust-like changes in color.
■
The cooker hood is designed for extracting cooking fumes and is for
domestic use only.
■
Unplug the appliance or remove the plug before cleaning or mainte-
nance.
■
Never use the appliance without a grease filter.
■
Do not flambé or set an open fire under or near the appliance.
■
The amount of grease inside the hood and the grease filters should be
monitored regularly by removing the grease filter and
cleaning both the appliance and the grease filter when necessary.
■
The grease filter must be cleaned regularly (whenever necessary or
at least every 3 months) to prevent risk of fire. The grease filter can be
washed in a dishwasher. Do not use the longest and hottest washing
programs.
■
The grease filters will wear out and should be replaced when their
surface/color begins to be worn or faded.
CONTROL PANEL FUNCTIONS
DECRASE/INCREASE SPEED
DISPLAY/TIMER INDICATOR
TIMER
LIGHT
When the appliance is connected to mains power source, the
operational mode of the appliance must be set to
X1
(within 1 minute
of connecting to mains current) by pressing the and keys
simultaneously for at least 4 seconds. After, press the or
keys until number 1 (= X1 mode chosen) appears on the display. Save
the X1 mode by pressing the timer key .The operational mode of
the appliance can be re-set by disconnecting and re-connecting the
appliance to mains current.
When pressing the timer key while the engine is running at
speed 1, 2, or 3, the engine stops after a set time, extracting the
fumes of a hot pan on the cooker while the pan is cooling.
When the timer key is pressed, the number 0 will begin to flash on
the display. Within 20 seconds the key can then be pressed to
set the timer: the number on the display changes to represent the
number of times (1, 2 ,3…) the key is pressed, which in turn repre-
sents the timer setting (1=10, 2=20, 3=30, 4=40, 5=50, 6=60, 7=70,
8=80, 9=90 minutes). Press the timer button to confirm delay. Timer
indicator starts blinking. After the 180 minutes without any user
action, the motor is turned off.
AC-models
Pressing the key briefly turns the lights on/off.
EC-models
Pressing the key briefly turns the lights on / off. The lights turn
on at full luminous intensity which is suitable for working. In addition,
the lights have a three-stage dimming function. When the lights
are on at full power, pressing the key for three seconds will dim the
lights to general lighting. When pressing the key once more for three
seconds, the lights dim to ambient lighting. The lights always turn on
at full luminous intensity.
