5
Apollo-V X2
|
Asennus- ja käyttöohje/Installation and user manual/Monterings och bruksanvisning
When the appliance is connected to mains power source, the
operational mode of the appliance must be set to X2 (within 1
minute of connecting to mains current) by pressing the and
keys simultaneously for at least 4 seconds. After, press
the or keys until number 2 (= X2 mode chosen) appears
on the display. Save the X2 mode by pressing the The flow control
damperkey .The operational mode of the appliance can be re-set
by disconnecting and re-connecting the appliance to mains current.
The flow control damper opening on display:
The flow control damper closing on display:
The dot after the number on the display is illuminated when the flow
control damper. After the 180 minutes without any user action, the
flow control damper closes.
AC-models
Pressing the key briefly turns the lights on/off.
EC-models
Pressing the key briefly turns the lights on / off. The lights turn
on at full luminous intensity which is suitable for working. In addition,
the lights have a three-stage dimming function. When the lights
are on at full power, pressing the key for three seconds will dim the
lights to general lighting. When pressing the key once more for three
seconds, the lights dim to ambient lighting. The lights always turn on
at full luminous intensity.
EN
CONTROL PANEL FUNCTIONS
■
Speed 1 is used for extracting cooking fumes and basic ventilation.
Increase the speed as the fumes become stronger or when more
efficient ventilation is needed. Use maximum speeds only when
necessary.
■
The selected speed (1. 2. 3. 4.) remains unchanged until the speed is
increased or decreased from the control panel. The engine cannot be
switched off completely, it is always running at least at speed 1.
■
Close the flow control damper (from the timer button) whenever
cooking fumes are no longer formed. In any case, the flow control
damper closes automatically after 180 minutes if the cooking hood
control panel is not touched.
■
The cooking hood can be cleaned with all-purpose kitchen cleaner
which can be purchased at grocery stores. After cleaning, the deter-
gent residues must be removed with a clean, damp cotton cloth (or
similar) that doesn’t scratch the surface. Residues that have not been
properly rinsed and dried may result in changes on the surface of the
cooker hood, e.g. rust-like changes in color.
■
The cooking hood is intended to control a powered roof ventilator
with Vilpe or similar technology,
■
The cooker hood is designed for extracting cooking fumes and is for
domestic use only.
■
Unplug the appliance or remove the plug before cleaning or mainte-
nance.
■
Never use the appliance without a grease filter.
■
Make sure there is adequate exchanging of air from outside in the
room by, for example, opening a window when the hood is in use.
Inadequate ventilation prevents the hood from working properly.
■
Do not flambé or set an open fire under or near the appliance.
■
The amount of grease inside the hood and the grease filters should be
monitored regularly by removing the grease filter and
cleaning both the appliance and the grease filter when necessary.
■
The grease filter must be cleaned regularly (whenever necessary or
at least every 3 months) to prevent risk of fire. The grease filter can be
washed in a dishwasher. Do not use the longest and hottest washing
programs.
■
The grease filters will wear out and should be replaced when their
surface/color begins to be worn or faded.
DECRASE/INCREASE SPEED
DISPLAY
FLOW CONTROL
DAMPER
LIGHT
KÄYTTÖ
USE
ANVÄNDNING
