9: Services Settings
XPort AR User Guide
69
2.
Enter or modify the fields in
Table 9-1
.
3.
Click
Submit
.
SNMP Configuration
Simple Network Management Protocol (SNMP) is a network management tool that monitors
network devices for conditions that need attention. The Web Manager configured SNMP service
sends traps whenever a request for information that contains an incorrect community name and
does not match an accepted system name for the service gets sent.
To configure SNMP, perform the following steps.
Table 9-1
PPP Configuration Fields
Field
Description
Local IP Address
Enter the IP address assigned to the XPort AR
’
s PPP interface.
Peer IP Address
Enter the IP address assigned to the peer (when requested during
negotiation).
Authentication Mode
Choose the authentication mode:
None
—No authentication is required.
PAP
—Password Authentication Protocol.
CHAP
—Challenge–Handshake Authentication Protocol.
Username
Enter a username if authentication will be used on the PPP interface. The
peer must be configured to use the same username.
Password
Enter a password if authentication will be used on the PPP interface. The
peer must be configured to use the same password.
