7: Terminal and Host Settings
XPort AR User Guide
58
3.
Click
Submit
.
Host Configuration
You can configure a remote host by using the Host web page. To configure a remote host, perform
the following steps.
1.
Click
Host
> Host 1
.
Figure 7-3
shows the page that displays.
Figure 7-3 Host Configuration Web Page
Send Break
Enter a Send Break control character, e.g., <control> Y, or blank to disable.
When the Send Break control character is received from the network on its
way to the serial line, it is not sent to the line; instead, the line output is forced
to be inactive (the break condition).
Break Duration
Enter how long the break should last in milliseconds.
Echo
Applies only to Connect Mode Telnet connections, not to Accept Mode. Only
disable
Echo
if your terminal echoes, in which case you will see double of
each character typed.
Table 7-2
Terminal on Line 1 Configuration Fields (continued)
Field
Description
