Configuration via Serial Mode or Telnet Port
44
WiPort™
User
Guide
Connect Mode Option
7
6
5
4
3
2
1
0
Manual
connection
0 1 0 0
Autostart
0 1 0 1
Hostlist
0 0 1 0
d) Datagram Type
Directed
UDP
1 1 0 0
e) Modem
Mode
Full
Verbose
1 0 1 1 0
Without
Echo
0 0 1 1 0
Numeric
modem
result
codes
1 0 1 1 1
a) Incoming Connection
Never Accept Incoming
Rejects all external connection attempts.
Accept with
modem_control_in
Active
Accepts external connection requests only when the
modem_control_in input is asserted. Cannot be used with
Modem Mode.
Always Accept
Accepts any incoming connection when a connection is not
already established. Default setting.
b) Response
Character Response
A single character is transmitted to the serial port when there is a
change in connection state:
C = connected, D = disconnected, N = host unreachable.
This option is overridden when the Active Start Modem Mode or
Active Start Host List is in effect. Default setting is Nothing
(quiet).
No Active Startup
Does
not
attempt to initiate a connection. Default setting.
With Any Character
Attempts to connect when any character is received from the
serial port.
Accept with
modem_control_in
Active
Attempts to connect when the modem_control_in input changes
from not asserted to asserted.
With a Specific Start
Character
Attempts to connect when it receives a specific start character
from the serial port. The default start character is carriage return.
