5: Configuration via Serial Mode or Telnet Port
WiPort® NR Embedded Device Server User Guide
49
- Trigger 1
Enable serial trigger input (N) ?
Trigger input1 [A/I/X] (X) ?
Trigger input2 [A/I/X] (X) ?
Trigger input3 [A/I/X] (X) ?
Message () ?
Priority (L) ?
Min. notification interval (1 s) ?
Re-notification interval (0 s) ?
- Trigger 2
Enable serial trigger input (N) ?
Trigger input1 [A/I/X] (X) ?
Trigger input2 [A/I/X] (X) ?
Trigger input3 [A/I/X] (X) ?
Message () ?
Priority (L) ?
Min. notification interval (1 s) ?
Re-notification interval (0 s) ?
- Trigger 3
Enable serial trigger input (N) ?
Trigger input1 [A/I/X] (X) ?
Trigger input2 [A/I/X] (X) ?
Trigger input3 [A/I/X] (X) ?
Message () ?
Priority (L) ?
Min. notification interval (1 s) ?
Re-notification interval (0 s) ?
Mail Server
Enter the IP address of the mail server. Enter each 3-digit section and press
Enter
between each section inputted. The current value is displayed in parentheses.
Mail server (0.0.0.0) ? (000) .(000) .(000) .(000)
Enter the username used by the WiPort NR embedded device server to send Email
messages. The current value is displayed in parentheses.
Note:
Do not use spaces
in the name.
Unit name () ?
Domain Name
Enter the Email server’s domain name. The current value is displayed in
parentheses.
Domain name () ? _
Recipient 1
Enter the full Email address of the trigger email recipient. The current value is
displayed in parentheses.
Recipient 1 () ? _
