4: Configuration Using Web Manager
WiPort® NR Embedded Device Server User Guide
27
Email Configuration
The unit sends an Email to multiple recipients when a specific trigger event occurs.
There are three separate triggers, based on any combination of the configurable pins
when selected as user I/O functions. Optionally, use a two-byte serial string to initiate
a trigger. Each trigger is independent of the others. Each condition within an
individual trigger must be met before the unit will send the Email.
To configure the WiPort NR email settings:
1. From the main menu, select
to open the Email Settings window.
Figure 4-8. Email Settings
2. Configure the following fields:
Server IP Address
Enter the IP address of the mail server.
Server Port
Enter the port number on the email server.
Domain Name
Enter the Email server’s domain name.
Unit Name
Enter the username used by the WiPort NR embedded device
server to send Email messages.
Note:
Do not use spaces in the name
.
Recipients
Recipient 1: Email
Address
Enter the email address designated to receive email
notifications.
Recipient 2: Email
Address
Enter an additional email address designated to receive email
notifications.
3. Click the
OK
button when finished.
4. On the main menu, click
Apply Settings
.
