Lantronix
SM24TBT2DPB Install Guide
33845 Rev. B
Page
11
of
48
Power over Ethernet (PoE)
Port Configuration
Supports per-port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices (PDs);
Auto Power Reset
Checks the link status of PDs and reboots PDs if there are no responses.
Automatically monitors and reboots PDs when no response to ICMP is received.
Power Delay
The switch provides power to the PDs based on configurable delay time when PoE
switch boots up, to protect switch from misuse of the PDs
Always on PoE
Lets you restart device, upload software, or swap active and alternate (backup)
firmware images while retaining PoE power to PDs. Note: It will take 75 – 80 seconds
to have PoE++ power on the ports to power PDs again if the switch makes a cold
restart. “Always on PoE” has no effect on this time. Allows warm reboot of the switch
without affecting the PoE output to the attached PDs.
Ultra-fast PoE
Improves PoE startup time. Ultra-fast PoE enables PoE output to attached PDs within 5
seconds after a cold start.
IEEE 802.3bt/at/af
compliant
Compliance with latest PoE standard allows the switch to provide up to 90W per port.
Supports full 90 Watts
per port
on all 24 ports simultaneously (with secondary power supply installed). This enables
higher power PoE applications such as LED lighting or digital signage on all ports
Hot-swappable dual
power modules
Allows for scaling of PoE power depending on needs or provides redundancy to
eliminate system downtime.
Powering options
Accommodates low-line and high-line AC or DC power and Digital Electricity™, making
it ideal for use in a wide variety of building applications. Note:
Digital Electricity is a
trademark of VoltServer. For more information about Digital Electricity, visit
Saf-D power
connector
Provides increased safety features for connecting higher voltage DC or hybrid AC/DC
systems.
Applications
•
LED Lighting, supplying power and connectivity to lighting and other building IoT devices.
•
IP Surveillance, supplying power and data to PTZ IP cameras, thermal cameras.
•
Supplying power and data to thin clients, POS system, digital signage.