Lantronix SM TAT4X Series, Install Manual

Page: 2 / 43

Lantronix SMxxTAT4Xx Install Guide
33785 Rev. F https://www.lantronix.com/ 2
Intellectual Property
© 2022, 2023 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be transmitted or
reproduced in any form or by any means without the written permission of Lantronix.
Lantronix
is a registered trademark of Lantronix, Inc. in the United States and other countries.
All other trademarks and trade names are the property of their respective holders.
Patented: https://www.lantronix.com/legal/patents/ ; additional patents pending.
Warranty
For details on the Lantronix warranty policy, please go to http://www.lantronix.com/support/warranty .
Contacts
Lantronix Corporate Headquarters
48 Discovery, Suite 250
Irvine, CA 92618, USA
Toll Free: 800-526-8766
Phone: 949-453-3990
Fax: 949-453-3995
Technical Support
Online:
https://www.lantronix.com/technical-support/
Sales Offices
For a current list of our domestic and international sales offices, go to www.lantronix.com/about/contact.
Disclaimer
All information contained herein is provided “AS IS.” Lantronix undertakes no obligation to update the information
in this publication. Lantronix does not make, and specifically disclaims, all warranties of any kind (express, implied
or otherwise) regarding title, non-infringement, fitness, quality, accuracy, completeness, usefulness, suitability or
performance of the information provided herein. Lantronix shall have no liability whatsoever to any user for any
damages, losses and causes of action (whether in contract or in tort or otherwise) in connection with the user’s
access or usage of any of the information or content contained herein. The information and specifications
contained in this document are subject to change without notice.
Revision History
Date Rev. Comments
9/16/20 C Add SM48TAT4XA-RP UL 62368-1 Certification.
6/22/22 D
FW v8.50.0030: modify name "Non-stop PoE" to "Always-On PoE” and add "Always-On
PoE" in mib. LLDP: When switch receives a packet with LLDP-MED, it sends an IEEE802.3
MAC/ PHY packet with two config/status TLVs. When port speed is 10/100Mbps, IEEE802.3
MAC/ PHY config/status TLV error sent from LLDP. Add PoE Force Mode and add 13 API
commands.
11/30/22 E
FW v8.50.0079: add First Time Wizard, make SNMP mode disabled factory default, and
change Auth Method default. Initial Lantronix rebrand. Note the two-step FW upgrade
(v8.40.1845 > 8.50.0062 > 8.50.0070). Add DHCP per VLAN function and add PoE Force
mode. Add SM24TAT4XB UL 62368-1 Certification. Update device and box labels.
2/21/23 F
Add SM24TAT4XB UL 62368-1 Certification. FW 8.50.0096 (both models): add support for
ConsoleFlow and implement API support HTTPS, CLI, and LPM. SM24TAT4XB only: add
DHCP per port function to select a particular IP interface. Add First Time Wizard. Change
SNMP Mode default to Disabled and change Auth Method defaults. Note when upgrading:
1) Reload factory defaults. 2) Copy running-config startup-config.