Lantronix
SMxxTAT4Xx Install Guide
33785 Rev. F
18
About This Manual
This manual describes how to install, initially configure, and troubleshoot the switch, including how to:
•
Install the switch,
•
Check switch status by reading the LED behavior,
•
Reset the switch or restore the switch to factory defaults,
•
Use a Web browser or the CLI to initially configure the switch, and
•
Troubleshoot the switch.
Note that this manual provides links to third party web sites for which Lantronix is not responsible.
Related Information
A printed Quick Start Guide is shipped with each switch. For Lantronix Documentation, Firmware, App Notes, etc.
https://www.lantronix.com/technical-support/
. For SFP manuals
see Lantronix
Note that this
manual provides links to third party web sites for which Lantronix is not responsible.
Other related manuals are listed below.
•
SMxxTAT4Xx Quick Start Guide, 33784
•
SMxxTAT4Xx Web User Guide, 33786
•
SMxxTAT4Xx CLI Reference, 33787
•
API User Guide for SM24TAT4XB and SM48TAT4XA-RP, 33843
•
Release Notes (version specific)
Caution
: The switch is an indoor device. If it is to be used with outdoor devices such as outdoor IP cameras or
outdoor Wi-Fi APs, then you are strongly suggested to install a surge protector or surge suppressor in order to
protect the switch. The switch is compliant with 802.3at in Environment A when using an isolated power supply.
For 802.3at Environment B applications, i.e., building to building, copper to copper endpoint connections:
1
) use
an Ethernet network isolator module (PoE disabled), or
2
) use mid-span injector(s), such as Lantronix MIL-L100
or, L1000i-at, between this switch’s PSE port and link partner PD port.
Warning
: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
