manualshive.com logo in svg

Lantronix MSS100, Installation Manual, Page: 62 / 71

Share
Download
Lantronix MSS100 Installation Manual Download Page 62

Updating Software

Configuring TCP/IP Reload

D-3

To manually configure the MSS IP parameters for software reload when running 
operational software (not BCP mode), use the following commands.

Figure D-2:  Configuring TCP/IP Reload

Note:

For instructions on how to log into the MSS to enter these commands, 
see the Getting Started chapter.

The path and filename are case-sensitive and must be enclosed in quotation marks. When 
attempting to boot across an IP router, you must configure the router to proxy-ARP for the 
MSS, or use the bootgateway feature. For more information, see  Bootgateway in the 
Commands chapter of the Device Server Reference Manual located on the CD-ROM.

D.2.1.2   NetWare

The MSS100.SYS file should be placed in the login directory on the NetWare file server. 
The MSS cannot actually log into the file server (since it knows no username/password); it 
can only access files in the login directory itself. On the MSS, specify the file server name, 
filename, and path.

Figure D-3:  Configuring NetWare Reload

D.2.1.3   MOP

The MSS100.SYS filename is the only parameter that the MSS needs to reload via MOP. 
Make sure the service characteristic is enabled on the host's Ethernet circuit, copy the 
MSS100.SYS file to the MOM$LOAD directory, and reload the MSS using the Initialize 
Reload command. Be sure to use binary mode for any file transfers.

Local> SET PRIVILEGED

Password> SYSTEM (not echoed)

Local>> CHANGE IPADDRESS nnn.nnn.nnn.nnn

Local>> CHANGE SOFTWARE “/tftpboot/MSS100.SYS”

Local>> CHANGE LOADHOST nnn.nnn.nnn.nnn

Local>> SHOW SERVER BOOT

Local>> INITIALIZE RELOAD

Local> SET PRIVILEGED

Password> SYSTEM (not echoed)

Local>>  CHANGE NETWARE LOADHOST fileserver

Local>>  CHANGE SOFTWARE SYS:\LOGIN\MSS100.SYS

Local>> INITIALIZE RELOAD

Summary of Contents for MSS100








































































Reviews:

No comments