manualshive.com logo in svg

Lantronix MSS100, Installation Manual, Page: 41 / 71

Share
Download
Lantronix MSS100 Installation Manual Download Page 41

Interactive Connections

Using the MSS

5-6

5.2.3.3   Show Ports

Show Ports displays the configuration and connection status of the serial port—settings 
such as flow control, baud rate, parity, and default hosts. In addition, it shows the status of 
DSR and DTR serial signals, port access type, and login status. Errors are summarized, 
although in less detail than in the Show Server Counters display.

5.2.3.4   Show Server Bootparams

Show Server Bootparams displays MSS identification and boot procedure information. The 
first lines display the MSS version, hardware address, network name and node number, 
identification string, and how long the MSS has been running. You will also see the 
software and ROM versions, configured loadhost, and startup file name.

5.2.3.5   Show Server Characteristics

Show Server Characteristics displays network-related server identification information 
including the MSS hardware address, node address, IP address, domain, any configured 
gateways and nameservers, and the subnet mask. In addition, it shows inactivity and 
retransmission limits, password restrictions, and the types of incoming logins permitted.

5.2.3.6   Show Server Counters

Show Server Counters displays quantitative information about send and receive errors. It 
also displays error information for the Ethernet and TCP/IP protocols that can be used to 
diagnose network transmission problems.

5.2.3.7   Show Session

Show Session displays information about current sessions including each active port, user, 
and type of session. 

5.2.3.8   Show Users

Show Users displays the name, port number, and connection status of all current users, or 
a specified user.

Summary of Contents for MSS100








































































Reviews:

No comments