Lantronix LSB4, Reference Manual, Page: 7 / 74

Introduction LSB4 Reference Manual
1-2
Manual Conventions
All command names are displayed in all capital letters. Manual conventions
for command parameters are discussed in the following paragraphs.
Required Parameters
♦
Required parameters are parameters that must be used with a par-
ticular command.
♦
Required parameters appear in all capital letters and within brac-
es ( {} ).
♦
When there is a choice of two or more required parameters to be
used with a command, all available options will be displayed
within braces. For example, if either
Enabled or Disabled must
be used with a command, the parameters will be displayed as
follows:
Optional Parameters
♦
Optional parameters are parameters that may be omitted or in-
cluded in a command.
♦
Optional parameters appear in all capital letters and within brack-
ets ( [] ).
♦
When there is a choice of two or more optional parameters that
may be used with a command, all available options will be dis-
played within brackets. For example, if either
Characteristics or
Counters may be used with a command, the parameters will be
displayed as follows:
User Defined Parameters
♦
These parameters are displayed in italics . The name of the param-
eter represents the type of information to enter, for example,
ipaddress .
Restrictions
♦
Any restrictions on the use of a command or its parameters will
be covered in this section.
ENABLED
DISABLED
 
 
 
CHARACTERISTICS
COUNTERS
To determine the
syntax of a particu-
lar command, con-
sult the section
covering that com-
mand.
Parameters may be
abbreviated when
entering a com-
mand, however, an
abbreviation must
be unique to the de-
sired command. For
example,
Show
could not be abbre-
viated to S, as that S
could also denote
Set .