Lantronix LSB4, Reference Manual, Page: 64 / 74

LSB4 Reference Manual Miscellaneous Commands
9-5
Logout
Logout is used to log out of an LSB4 port.
If the LSB4 has been logged into from a network using one of the network ports,
the network session is terminated. If it was logged into from the console port, the
console settings are reloaded from non-volatile RAM. The LSB4 will begin a new
console session when the Return key is pressed.
Parameters Port number
Specifies which port connection will be closed.
Restrictions
Privileged status is required when logging out ports being
used by other users.
See Also
Set Privileged, page 2-5.
Netstat
This command displays a listing of all network sessions currently connected to
the LSB4. The information will be grouped by protocol.
Ping
This command sends a request for an echo packet to another IP network host.
Parameters host
host is any combination of characters, or an IP address. Any
character string entered must be resolvable to an IP address.
If an IP address is used, it must be in the following format:
nnn.nnn.nnn.nnn
where nnn is a decimal number between 0 and 255.
Restrictions
This command requires privileged status.
See Also
Set Privileged, page 2-5.
LOGOUT PORT number
[ ]
NETSTAT
PING host
Entering Logout
without the Port
number parame-
ters terminates the
current session.
To display informa-
tion about the
LSB4Õs ports, use
the
Show Users or
Show Port com-
mand.
If the specified host
contains lower case
letters, it must be
enclosed in quota-
tion marks.