Lantronix LSB4, Reference Manual, Page: 10 / 74

System Commands LSB4 Reference Manual
2-2
Set/Define System
Parameters Incoming
Telnet
Enables incoming Telnet connections.
None
Disables incoming Telnet connections.
Password
Establishes a password requirement for logging into the LSB4.
Nopassword
Removes the password requirement for logging into the
LSB4.
Login Password
Establishes or changes the password required to log into the
LSB4.
CurrentPswd
Any combination of six digits or letters.
Name
Changes the LSB4Õs name. This name is used to connect to the
LSB4 from remote hosts.
systemname
Any combination of up to sixteen characters. When the LSB4
is shipped, the system name is in the form LSB4_xxxxxx. The
six xÕs represent the last six hexadecimal digits of the ethernet
address.
Privileged Password
Establishes or changes the password required to use privi-
leged commands.
SET
DEFINE
 
 
 
SYSTEM
INCOMING
TELNET
NONE
PASSWORD
NOPASSWORD  
 
 
 
 
 
 
LOGIN PASSWORD
[ ]
CurrentPswd
[ ]
NAME systemname
PRIVILEGED PASSWORD
[ ]
CurrPrivPswd
PROMPT promptstring
REFRESH onds sec
SOFTWARE filename
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Incoming has no
effect on the serial
console port.
The default
CurrentPswd is
access .
If the specified
Name contains
lower-case letters, it
must be enclosed in
quotation marks
(Ò Ò) and may not
include any spaces.