Lantronix LSB4, Reference Manual, Page: 16 / 74

LSB4 Reference Manual Protocol Commands
3-1
Introduction
Protocol commands are used to specify, configure and display the LSB4Õs proto-
col settings. Protocol settings are for setting values for incoming logins and for
downloading software.
Set/Define Protocol
Set Protocol and Define Protocol accept the following parameters [Table 3-1]:
Table 3-1: Set/Define Protocol Parameters
Show/List Protocol
Show Protocol and List Protocol display the status of the LSB4Õs protocol set-
tings.
Protocol Parameter Function
AppleTalk Zone IdentiÞes an AppleTalk zone for the LSB4
IP IPaddress SpeciÞes an IP address for the LSB4
Loadhost SpeciÞes a host from which to download
software to the LSB4
Subnet Mask Assigns a subnet mask
Netware Loadhost SpeciÞes a host from which to download
software to the LSB4
3chapternumber
For an explanation
of the
Set and
Define commands,
see page 2-1.
For an explanation
of the
Show and
List commands, see
page 2-1.