Command Reference
Set/Define Port Commands
12-43
12.43.23 Set/Define Port Menu
Specifies whether the port is given a finite choice of menu options to use after logging in (enabled), or is
given the regular Local> prompt (disabled).
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
Restrictions
You must be the privileged user to use this command on ports other than your
own.
Parameters
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
Note:
In the absence of a PortList or the All parameter, the configuration will affect the
current port only.
See Also
Set/Define Menu, page 12-26; Clear/Purge Menu, page 12-6; Show/Monitor/
List Menu, page 12-101; Menu Mode, page 5-14.
12.43.24 Define Port Modem Control
Specifies whether modem control lines are to be used. Modem Control must be disabled to use DSRlogout.
Modem Control implies DSRlogout, in that the ETS will attempt to log out any connections if the port’s
DSR signal drops.
Applies To
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
The EPS4, ETS8 and ETS16 only support DSR/DTR. The other models
support simultaneous DSR/DTR and RTS/CTS.
Restrictions
You must be the privileged user to use this command.
Modem Control cannot be configured for Virtual ports (Port 0).
Parameters
PortList/All
Specifies a particular port or group of ports, or all ports. Port numbers are
specified with integers between 1 and the total number of physical ports. Lists
of ports must be separated by commas. Ranges of ports must be separated by
a dash (-).
SET
DEFINE
PORT
PortList
ALL
MENU
ENABLED
DISABLED
DEFINE PORT
PortList
ALL
MODEM CONTROL
[
]
ENABLED
DISABLED