manualshive.com logo in svg

Lantronix Console Server 800, User Manual

Share
Download
Lantronix Console Server 800 User Manual Download Page 31

 27

4.6.3 

INFO

INFO

INFO

INFO

 Command 

 

 
sys admin>INFO 
Sys admin: logins: 1 
Sys admin: tftp not in progress current host:file ==> 
0 Active Telnet Sessions   Timeout = 5 mins.     0 SysAdmin Sessions 
Ethernet Address: 00-30-31-00-0B-13    IP source is 800 
IP=192.168.1.121  SM=255.255.255.0  GW=192.168.1.1 
Modem: No Active Call   Current State: In command mode 
Modem: Timeout = 1 mins. 
Modem: Init String: ATH0S0=1 
Modem error: none 
Device Port:   D1 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D2 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D3 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D4 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D5 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D6 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D7 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
Device Port:   D8 DCE   9600,N,8,1 FLOW=XON/OFF RTS=0 DTR=0 
 
Terminal Port: T  DCE   9600,N,8,1 FLOW=XON/OFF RTS=1 DTR=1 
Modem Port:    M  DCE  38400,N,8,1 FLOW=RTS/CTS RTS=1 DTR=1 
 
sys admin> 
 

 
The INFO command displays miscellaneous system information.  Device port 
settings, network port settings, and other system data are reported. 
 
The network port will return the following information: 
 

•

  The amount of active telnet sessions 

•

  The telnet session timeout limit 

•

  The amount of network administrator connections 

•

  The unique hardware (MAC) address of the card, expressed as six groups of 

one-byte hexadecimal numbers 

•

  The source of the network port IP address (internal or external) 

•

  The primary IP information, including: IP address, subnet mask, and gateway 

•

  The secondary IP information, including: destination address, subnet mask, 

and gateway 

 
The modem card will return the following information: 
 

•

  The connection status of the modem 

•

  The current modem session timeout limit (see Section 6.9,Breaking User    

Connections) 

•

  The current modem state, listed as either power-up mode or command mode 

•

  The modem initialization string sent at startup 

•

  Any miscellaneous modem error messages 

 

Summary of Contents for Console Server 800






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands