Lantronix Console Server 800 User Manual Download | Manualshive

Page: 21 / 69

background image

17

LOGGED OUT HELP SCREEN

LCI800>HELP
F1 - Display Help Screen    (VT100 mode)
F2 - Display Pull Down Menu (VT100 mode)
TTY COMMANDS:(LOGGED OUT MODE)
LOGIN            - Login with ID and Password
INFO              - Display System Info
REBOOT            - Perform a warm boot, requires root password

LCI800>

LOGGED IN HELP SCREEN

sys admin>HELP
ConsoleServer800 Sys Admin Command List
[] - optional <> - parameter must be specified
   | - OR
ABBREVIATIONS           - Show list of command abbreviations
ADDUSER [new user id]     - Add a new user
BACKUP                - Backup internal database
                 (db will be output using ASCII)
CHANGEPSWD              - Change the sys admin password
CONNECTIONS [/MONITOR]   - Show list of current connections
                 (/monitor will auto-refresh)
DELETEUSER [existing user id] - Delete a user
DEVICES              - Display device settings
DEVICES [/ALL|n|device name] (n can be 1 to 32) - change settings
EDITUSER [existing user id]   - Edit a user's settings
FORCELOGOUT <terminal channel>- Force a user off the system
FORCELOGOUT sysadmin      - Force logout a sys admin
                 session on network.
INFO                  - Report miscellaneous information
LCIUPDATE [/tftp]         - Start system update process
                 (requires update file(s))
/tftp - used only at console port, when system updates are
   transfered using the network.
LINESPERPAGE [n]          - Display/set number of lines before pause
                 (n can be 0 to 99, 0 disables)
LISTDEVICES             - Show list of device names
LISTUSERS [user id|/ALL]    - Display list of users
LOGOUT,LOGOFF           - Logout
MODEM [/DEFAULT]          - Display/set modem init string
                 /DEFAULT - set init string to default
MODEMTIMEOUT [t]          - Display/set timeout for modem calls
                 (t can be 0 to 30 minutes, 0 disables)
NETWORK [/EDIT]           - Display/set network parameters
POWERSTATUS             - Show status of power supplies
REBOOT                - Perform a warm boot, requires root password
RESTORE              - Restore internal database
                 (upload ASCII file)
TELNETTIMEOUT [t]         - Display/set timeout for telnet sessions
                 (t can be 0 to 30 minutes, 0 disables)
tftp [get] host:file      - Modified tftp command, used to
                 transfer new updates to this box
TIMEOUT [t]             - Display/set timeout on sys admin login
                 (t can be 0 to 9 minutes, 0 disables)
VERSION              - Report software version information

sys admin>

A listing of abbreviations for the administrator commands is also available when
connected to the administrator port. The

ABBREVIATIONS

command is only

available when logged in.

«
...
19
20
21
22
23
...
»

Summary of Contents for Console Server 800






































































Reviews:

No comments

Related manuals for Console Server 800

Express5800/T110g-E

Brand: NEC Pages: 2

Brand: IBM Pages: 214

Azure StorSimple 8100

Brand: Microsoft Pages: 12

ProLiant DL180 Gen10

Brand: HPE Pages: 10

8480 - Eserver xSeries 205

Brand: IBM Pages: 174

9123710 - eServer OpenPower 710

Brand: IBM Pages: 70

Brand: IBM Pages: 110

Brand: RaidSonic Pages: 2

SuperServer 1029P-MT

Brand: Supermicro Pages: 123

Sun Fire Netra 1280

Brand: Sun Microsystems Pages: 10

Brand: D-Link Pages: 40

TS-73AeU Series

Brand: QNAP Pages: 70

Brand: Sonnet Pages: 16

Brand: PRG Pages: 136

LAN Brick Eth 10

Brand: MPI Technologies Pages: 2

ANTMAINER S19j Server

Brand: BITMAIN Pages: 21

G4-Apex-ENT-80T

Brand: Viavi Pages: 11

NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT

Brand: Red Hat Pages: 74

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands