20
The
Clear screen after a command (Y/N) | YES >
option determines
if the screen clears when most commands are executed. Disallowing this screen
behavior keeps the last few commands and responses on the terminal screen.
The default value for this option is
YES
. Pressing
<ENTER>
will accept the
default value; typing
NO
and then pressing
<ENTER>
disallows this screen
behavior.
sys admin>adduser
Number of available user records: 50
Number of users defined: 0
Enter user id | USER ID > usr1
Enter case sensitive password | PASSWORD > ***
Re-enter case sensitive password | PASSWORD > *****
0-10 | MAX CONCURRENT LOGINS: 1>2
Allowed devices example: 1-5,8 | DEVICES 0 > 1-8
Allow user to clear device buffer (Y/N) | YES >
Clear screen after a command (Y/N) | YES >
Enter user id | USER ID >
sys admin
The above procedure has defined one user. The ConsoleServer 800 will prompt
for the next user ID to be defined. Repeat the set-up process until all users have
been entered. To return to the administrator prompt, simply press
<ENTER>
at
the
USER ID>
prompt. More users may be added at any time by using the
ADDUSER
command. A maximum of 50 users can be defined.
sys admin>EDITUSER TOM
Enter accepts present value
Enter case sensitive password | PASSWORD >
0-10 | MAX CONCURRENT LOGINS: 2>6
Allowed devices example: 1-5,8 | DEVICES 1-4 >
Allow user to clear device buffer (Y/N) | YES > n
Clear screen after a command (Y/N) | NO > n
sys admin>
To edit or change parameters for a particular user after defining that user ID, use
the
EDITUSER
command. For example, if the user 'Tom' needed to have more
concurrent login capabilities, the administrator would type
EDITUSER TOM
on the
command line. As each line comes up, change the settings and press
<ENTER>
,
or press
<ENTER>
to accept the current setting.
NOTE: When editing any group of parameters, pressing the
<ENTER>
key will
accept the current value and move to the next parameter in the list.
