5
3.
Insert mounting screws into each hole and tighten. Check to make sure
that the unit is seated snugly against the rack uprights. Proceed with the
power, network, terminal, and device installation outlined below.
3.3 Power
For both the AC and DC versions, the ConsoleServer 800 consumes
approximately
10 W
of electrical power.
3.3.1 AC
The AC version of the ConsoleServer 800 uses universal auto-switching AC
power supplies. The power supplies accept AC input voltage between 85 and
264 VAC with a frequency between 47 and 440 Hz. A country-specific power
cord is included with the unit; additional cords are available from Lightwave if
required.
AC power input
Installation:
Materials:
•
ConsoleServer
800
•
included power cable
•
power
outlet
1.
Select a power outlet for the ConsoleServer. It may be desirable to
provide an uninterrupted power source (UPS) for the unit.
2.
Connect the provided AC cable to the rear of the ConsoleServer.
3.
Connect the other end of the power cable to the selected power outlet.
