Configuration
Serial Channel (Port) Configuration
7-9
Connect Mode
Connect Mode defines how the Device Server makes a connection, and how it reacts to
incoming connections over the network. Use the following table to select Connect Mode
options:
*On DTE devices, use DCD (input) instead of DTR. DTR is an output signal on a DTE serial port.
The DTE devices are the CoBox Micro, CoBox Mini, and CoBox Mini100.
Note:
See Binary to Hexadecimal Conversion on page E-18 for more
information on converting binary values to hexadecimal format.
Table 7-4: Connect Mode Options
Option
Bit
7
6
5
4
3
2
1
0
Incoming (network) Connection
Never accept incoming
0
0
0
Accept incoming with DTR*
0
1
0
Accept unconditional
1
1
0
Response
Nothing (quiet)
0
Character response (C=conn,
D=disconn, N=unreachable)
1
Startup (on serial connection)
No active startup
0
0
0
0
With any character
0
0
0
1
With active DTR*
0
0
1
0
With CR (0x0D) only
0
0
1
1
Manual connection
0
1
0
0
Autostart
0
1
0
1
Datagram Type
Directed UDP
1
1
0
0
Modem Mode
With Echo
1
0
1
1
0
Without Echo
0
0
1
1
0