98
Appendix B
Command Line mode
Except the web acess mode, the Lantech switch also support Telnet access and console
access mode, to compare the web access mode, both the Telnet and console only support
command line user interface, all these commands will show as below:
1. Access via console port
When the connection between Switch and PC is ready, turn on the PC and run a
terminal emulation program or Hyper Terminal and configure its communication
parameters to match the following default characteristics of the console port:
Baud Rate:115200 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
OK
press Enter key to have the login prompt appears. First you need to key in cli to enter
the command line mode then
admin (default value) for both User name and
99
Password (use Enter key to switch), then press Enter and the Main Menu of console
management appears. Please see below figure for login screen.
Notice: if you forgot the password, you can access the switch via console port and input
lantech/lantech to restore the password to default.
Summary of Contents for IPES-3408 Series
Page 59: ...116...
