46
Description:
Enter up to 47 characters to be descriptive name for identifies this port.
Enabled:
The port can be set to disable or enable mode. If the port setting is disable then will
not receive or transmit any packet.
Flow Control:
set flow control function of the port.
Speed:
Selects any available link speed for the given switch port. Only speeds supported by
the specific port is shown. Possible speeds are:
Disabled
Disables the switch port operation.
Auto
Let switch port auto negotiating speed with the link partner and selects the highest
speed that is compatible with the link partner.
10Mbps HDX - Forces the cu port in 10Mbps half duplex mode.
10Mbps FDX - Forces the cu port in 10Mbps full duplex mode.
100Mbps HDX - Forces the cu port in 100Mbps half duplex mode.
100Mbps FDX - Forces the cu port in 100Mbps full duplex mode.
1Gbps FDX - Forces the cu port in 1Gbps full duplex mode.
6.5.2 Port Status
47
Port No:
This is the logical port number for this row.
Type:
This is the logical port type.
Link Status:
The current link state is displayed graphically. Green indicates the link is up and red
that it is down.
Speed:
Provides the current link speed of the port.
6.5.3 Port Statistics
Port:
The logical port for the settings contained in the same row.
Type:
Displays the current speed of connection to the port.
Link:
The status of linking - Up or Down.
State:
It's set by Port Control. When the state is disabled, the port will not transmit or
receive any packet.
Tx Good Packet:
The counts of transmitting good packets via this port.
Tx Bad Packet:
The counts of transmitting bad packets (including undersize [less than 64 octets],
oversize, CRC Align errors, fragments and jabbers packets) via this port.
Rx Good Packet:
The counts of receiving good packets via this port.
Rx Bad Packet:
Summary of Contents for IPES-3408 Series
Page 59: ...116...
