82
6.15 Aggregation
6.15.1. Aggregation Configuration
Group Configuration
Trunking Group
Number of trunking group
Enable LACP Dynamic Trunking:
Enable Trunking function
Port Members
Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
83
6.15.2 LACP Port Status
Trunking Group
Number of trunking group
LACP
'Yes' means that LACP is enabled and the port link is up. 'No' means that LACP is
not enabled or that the port link is down. 'Backup' means that the port could not join
the aggregation group but will join if other port leaves. Meanwhile it's LACP status is
disabled.
System ID
The ID of each Trunking group
Port Members
Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
Summary of Contents for IPES-3408 Series
Page 59: ...116...
