58
ou can view the port that connected device's MAC address and related device's MAC
address.
6.9.2 Access Control List
You can use ACL feature to deny the access from the specified IP address or MAC
address.
6.9.2.1 ACL with Layer2 (MAC)
No: The number of ACL record.
Port: assign the port which you want to enable the ACL function.
Direction: let the switch check the destination address or source address of packet.
Address: assign the MAC address which you want to deny.
Mask: set the mask to filter the MAC range.
6.9.2.2 ACL with Layer3 (IP)
No: The number of ACL record.
Port: assign the port which you want to enable the ACL function.
Direction: let the switch check the destination address or source address of packet.
Address: assign the IP address which you want to deny.
Mask: set the mask to filter the IP range.
59
6.9.3 IEEE 802.1X Radius Server
802.1X makes use of the physical access characteristics of IEEE802 LAN
infrastructures in order to provide a means of authenticating and authorizing devices
attached to a LAN port that has point-to-point connection characteristics, and of
preventing access to that port in cases in which the authentication and authorization
process fails. To enable 802.1X, you still to fill in the authentication server information.
Server IP
The ip address of the authentication server.
Server Port
The UDP port number used by the authentication server to authenticate.
Shared Key
When this check box is checked, the IP addresses among IP permit list will be
allowed to access via telnet service.
NAS Identifier
A string used to identify this switch.
Enable on Ports
You can select the specific port and configure the authorization state.
Summary of Contents for IPES-3408 Series
Page 59: ...116...
