Lanner R6S, User Manual

Page: 85 / 89

R6S User Manual
85
Command Format:
1. Host communication interface: COM#6 (RS-232)
2. Support buad rate: 57600/ 8N1
3. Communication protocol: ANSI terminal
GET VariableName
SET VariableName value
MCU Command
Wirte/Read
(SET/GET)
VariableName VariableName value
Startup Voltage(mV)
SET STARTUP_VOLTAGE 0( default ) 0mV
GET STARTUP_VOLTAGE
Shutdowm
Voltage(mV)
SET INPUT_VOLTAGE_MIN 8500( default ) 8500mV
GET INPUT_VOLTAGE_MIN
PowerOn Delay (Sec)
SET POWERON_DELAY 4( default ) 4S
GET POWERON_DELAY
PowerOff Delay (Sec)
SET SHUTDOWN_DELAY 4( default ) 4S
GET SHUTDOWN_DELAY
Input Voltage GET INPUT_VOLTAGE
Wakeup DI1 SET WAKEUP_ENABLE 7( default )
1:DI1
2:Reserved
4: Reserved
Device ID GET DEVICE_ID R6S_N
Firmware Version GET VERSION 0.06B
Digital Out
(LTE on/off)
SET DIGITAL_OUT 31( default )
Digial In GET DIGITAL_IN
Ignition GET IGNITION
Digital POE
SET DIGITAL_POE 1023( default ) 0~1023
GET DIGITAL_POE
Digital DO SET DIGITAL_DO 0( default ) 0~255
Digital DI GET DIGITAL_DI
Save flash SAVE