Lanner electronics EM-568 Series, User Manual

Page: 6 / 56

Chapter 1 Introduction
2
User’s Manual
1.3 Specification
EM-568 Series
Processor VIA low power CPU 400/ 533/ 733/800M/1G on board
Default: Eden-533M (EM-568A) & C3-800M (EM-568B)
FSB 133 MHz
L2 Cache 64K on CPU
Chipset VIA VT8606 (North) & VT686B (South)
BIOS 256KB Award license BIOS
System Memory SODIMM socket up to 512MB PC133 / PC100 SDRAM
VGA & LCD 1
〉
Chip: VT8606 integrated S3 ProSavage 4, AGP 4X Graphics support 36 bit TFT/
DSTN/ STN LCD & 2 channels of 18 bit (2x18) LVDS
1-1
〉
Connector: a
〉
VGA: 2x6x2.54 mm pin header
b
〉
TFT LCD: 2x25x1.0 mm box header
c
〉
LVDS LCD: 2x15x1.0 mm box header (2x18 bit)
2
〉
Chip: Thine THC63LVDF83A or Compatible Support one channel 24 bit LVDS
LCD(optional)
2-1
〉
Connector: LVDS LCD:1x20x1.25 mm right angle box header (24 bit)
(optional)
3
〉
VRAM: Support 8/ 16/ 32MB memory (shared)
Audio Chip: VIA VT1612A AC 97 Codec & NS LM1877 Amp for 2W per channel
Connector: 2x8x2.0 mm pin header (Mic-in, Line-in, CD-in, Line-out & Speaker-out)
Ethernet Chip: Realtek RTL8100B (10/100 BaseT)
Connector: RJ-45 Vertical type
Solid State Disk Connector: 50-pin socket for type I/II Compact Flash
PC/104 Connector: PC104 connector (ISA)
Expansion Bus PCI slot
Serial Port (FOUR) Chip: VT686B & Winbond W83877TF
COM Setting: COM 1, 3 & 4 is RS-232, COM 2 is RS-232/422/485 setting by jumper
COM Power: 4 COMs pin 9 all with +5V & +12V selector
Connector: 2x20x2.54 mm pin header
Parallel Port Multi-mode (SPP/ EPP/ ECP)
Connector: 2x13x2.54 mm pin header
IDE (TWO) Connector: 2x20x2.54 mm & 2x22x2.0 mm pin header
FDD Connector: 2x17x2.54 mm pin header
USB V1.1 (FOUR) Connector: 2* 2x5x2.54 mm pin header
PS/2 Keyboard &
Mouse
Connector: 2x4x2.54 mm pin header
IRDA Shared with COM 2
Connector: 1x5x2.54 mm pin header
RTC 3V Li battery in holder
LCD Inverter Port Connector: 1x5x2.54 mm wafer
System Indicator H/W Reset, Power LED, HDD LED & System alarm speaker
Connector: 1x11x2.54 mm pin header
Watchdog Timer 16 levels timer intervals
Digital I/O 4 * In & 4 * Out
Connector: 2x5x2.54 mm pin header
Hardware Monitoring Chip: VT686B (South)
Power Management Support power saving modes, normal/ standby/ suspend; APM 1.2 compliant
Power Input
AT or ATX select by adapter cable & Jumper setting
Connector: 1x7x2.54 mm wafer
OS Support WIN 98, 2000, XP & WIN NT4.0; Linux Red Hat 7.2 or later version
Temperature Operating: 0 degree C ~ 60 degree C
Storage: - 10 degree C ~ 70 degree C
Humidity 5% ~ 95% relative humidity, non-condensing
Dimension 5.75” x 8.0” EBX form factor