Lanner electronics EM-568 Series, User Manual

Page: 46 / 56

Chapter 3 BIOS Setup
42
User’s Manual
3.8 PnP/PCI Configuration
Both the ISA and PCI buses on the CPU card use system IRQs & DMAs. You must set up the IRQ and DMA
assignments correctly through the PnP/PCI Configuration Setup utility; otherwise the motherboard will not work
properly.
PnP/PCI Configuration Setup Screen
Phoenix – Award BIOS CMOS Setup Utility
PnP/PCI Configurations
PNP OS Installed [No] Item Help
Reset Configuration Data [Disabled] Menu Level
f
Resources Controlled By [Manual]
f
IRQ Resources [Press Enter]
f
DMA Resources [Press Enter]
f
Memory Resources [Press Enter]
PCI/VGA Palette Snoop [Disabled]
PCI Latency Timer (CLK) [32]
INT Pin 1 Assignment [Auto]
INT Pin 2 Assignment [Auto]
INT Pin 3 Assignment [Auto]
INT Pin 4 Assignment [Auto]
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
configure non-boot
devices.
Ç È Æ
Move Enter: /-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
PNP OS Installed: When set to
Yes , BIOS will only initialize the PnP cards used for booting (VGA, IDE, SCSI).
The rest of the cards will be initialized by the PnP operating system like Windows 95 or 98. When set to No ,
BIOS will initialize all the PnP cards. So, for non-PnP operating system (DOS, Netware), this option must set to
Yes .
Reset Configuration Data: Normally, you leave this field
Disabled , Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the system
reconfiguration has caused such a serious conflict that the operating system cannot boot.
The settings are:
Enabled and Disabled .