Chapter 3 BIOS Setup
32
User’s Manual
Halt On: During the power-on-self-test (POST), the computer stops if the BIOS detect a hardware error. You
can tell the BIOS to ignore certain errors POST and continue the boot-up process. These are the selections:
No errors
Whenever the BIOS detects a non-fatal error the system will not be
stopped and you will be prompted
All errors
The system boot will be stopped for any error that may be detected.
All, But Keyboard
The system boot will not stop for a keyboard error; it will stop for all
Other errors.
All, But Diskette
The system boot will not stop for a disk error; it will stop for all other
Errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk error; it will stop
for all other errors.
Summary of Contents for EM-568 Series
Page 4: ......
Page 8: ...Chapter 1 Introduction 4 User s Manual 1 5 Board Layout...
