Page: 43
3.13
Set Supervisor/User Password
The “SUPERVISOR/USER PASSWORD” utility sets the password. The SBC is shipped with the
password disabled. If you want to change the password, you must first enter the current
password, then at the prompt -- enter your new password. The password is case sensitive, and
can be up to 8 alphanumeric characters. Press <Enter> after you have finished typing in the
password. At the next prompt, confirm the new password by re-typing it and pressing <Enter>
again. When you are done, the screen automatically reverts to the main screen. Remember
that when you use this feature, the “Security Option” line in BIOS FEATURES SETUP will
determine when entering the password will be required.
Standard CMOS Features
Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/ PCI Configurations
Save & Exit Setup
PC Health Status
Exit Without Saving
Esc : Quit
á
â
àß
: Select Item
F10 : Save & Exit Setup
Change / Set / Disable Password
To disable the password
, press the <Enter> key instead of entering a new password when
the “Enter Password” in the dialog box appears. A message will appear confirming that the
password is disabled.
If you have set both supervisor and user password, only the supervisor password allows you to
enter the BIOS SETUP PROGRAM.
Note : If you forget your password, the only way to solve this problem is to discharge the CMOS
memory by turning power off and placing a shunt on the S1 (open pad) for 5 seconds, then
removing the shunt.
3.14
S
AVE
& E
XIT
S
ETUP
Select this option and press the <Enter> key to save the new setting information in the CMOS
memory and continue with the booting process.
Standard CMOS Features
Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/ PCI Configurations
Save & Exit Setup
PC Health Status
Exit Without Saving
Esc : Quit
á
â
àß
: Select Item
F10 : Save & Exit Setup
Save Data to CMOS.
Enter Password
:
Save to CMOS and EXIT (Y/N) ? Y
Summary of Contents for EM-561 Series
