Lanier lp145n, Hardware Manual

Page: 63 / 157

Configuration
52
4
A
Press the
{
Menu
}
key.
B
Select [ Host Interface ] using
{T}
or
{U}
, and then press the
{
q Enter
}
key.
C
Select [ Network Setup ] using
{T}
or
{U}
, and then press the
{
q Enter
}
key.
D
Select [ Active Protocol ] using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
E
Select the network protocol using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
F
Select [ Active ] or [ Not Active ] using
{T}
or
{U}
, and then press the
{
q
Enter
}
key.
Set other protocols you need to set in the same way.
• Select
[ Not Active ] for unused protocols.
• Enable IPv4 to use the Pure IPv4 environment of NetWare 5/5.1, NetWare 6/6.5.
AQV251S