Lanier lp145n, Hardware Manual

Page: 36 / 157

Attaching Printer Hard Disk Drive Type 8100
25
2
M
Connect the blue end of the flat cable to the socket on the controller board.
When installing an SDRAM module on the controller board, do not store the
controller board to the printer, and attach an SDRAM module.
N
Remove the protective sheet when installing the hard disk drive is com-
pleted.
Be sure to check whether the hard disk drive is completely secured before re-
moving the sheet.
O
Install the default or optional SDRAM modules into the slot.
For details about installing the SDRAM modules, see p.27 “Attaching Memo-
ry Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)”.
AQV521S
AQV737S