Lanier lp145n, Hardware Manual

Page: 42 / 157

Attaching Memory Unit Type D 128MB, Memory Unit Type E 256MB (SDRAM Module)
31
2
Note
❒
Be sure to return the provided screwdriver to its original position on the
inside of the front cover.
❒
After finishing the installation, you can check the memory unit is properly
installed: Print the configuration page from the
[ List/Test Print ]
menu. If it is
installed properly, the memory capacity will appear under “Total Memo-
ry” on the configuration page.
❒
The table below shows the total SDRAM module capacities.
❒
If the memory unit is not properly installed, repeat this procedure. If you
cannot install it properly even after reinstallation, contact your sales or
service representative.
❒
Install the controller board carefully to prevent any malfunction.
Reference
For printing the configuration page, see “Printing the Test Page”, Quick In-
stallation Guide.
Standard Extended Total
128 MB 128 MB 256 MB
128 MB 256 MB 384 MB
256 MB 128 MB 384 MB
256 MB 256 MB 512 MB