Operating Instructions
Client Reference
115
❖
❖
❖
❖
When connecting with IEEE 1394
•
The printer must be connected to the IEEE 1394 connector of a computer using the IEEE 1394
interface cable.
•
[
Activate
]
is selected in the SCSI print of IEEE 1394 and
[
Activate
]
is selected in the Bidi-SCSI print.
•
Under Windows XP,
[
Enable bidirectional support
]
must be selected and
[
Enable printer pooling
]
must not be selected on the
[
port
]
tab with RPCS printer driver.
❖
❖
❖
❖
When connecting with USB
The printer must be connected to the USB connector of a computer using the USB interface cable.
-
-
-
-
Inactivating the Device
❖
❖
❖
❖
If you do not want to install the printer when [Found New Hardware Wizard] starts with an op-
erating system, which supports SCSI print, inactivate the device by following the procedures.
•
Windows XP
A
In the
[
Found New Hardware Wizard
]
dialog box, confirm that
[
This wizard helps you install
software for: Unknown
]
is displayed, and select
[
Install from a list on specific location (Ad-
vanced)
]
, and then click
[
Next>
]
.
B
When the
[
Please choose your search and installation option.
]
message appears, remove all
the selections from
[
Search for the best driver in these locations.
]
, and then click
[
Next>
]
.
C
When the
[
The wizard could not find the software on your computer for..
]
message appears,
click
[
OK
]
.
D
When the
[
Cannot Install this Hardware
]
message appears, select the
[
Don't prompt again to in-
stall the software
]
check box, and then click
[
Finish
]
.
