7
English
Confirming Transmission
When the last page of your document has been sent
successfully, the machine beeps and returns to Standby Mode.
When something goes wrong while sending your fax, an error
message appears on the display. For a listing of error messages
and their meanings, see Operating Instruction.
If you receive an error message, press
Clear/Stop
to clear the
message and try to send the document again.
You can set your machine to print a confirmation report
automatically each time sending a fax is completed. For further
details, see the MSG Confirm item Operating Instruction.
Automatic Redialing
When the number you have dialed is busy or there is no answer
when you send a fax, the machine automatically redials the
number every three minutes up to seven times by the factory
default settings.
When the display shows “Retry Redial ?,” press
Enter
to redial
the number without waiting. To cancel the automatic redialing,
press
Clear/Stop
.
To change the time interval between redials and the number of
redial attempts. See Operating Instruction.
Redialing the Last Number
To redial the last number you dialed:
Press
Redial/Pause
.
If a document is loaded in the ADF, the machine automatically
begins to send.
Reference:
See Operating Instruction for installing printer and scanner software.
Summary of Contents for LF215
Page 1: ...your document management partner Operator Manual LF215 User Guide...
Page 184: ...H916 8650...
Page 196: ...8 Memo...
