Lanier LF215 Operating Instructions Manual Download

Page: 145 / 196

ROUBLESHOOTING

Clearing Document Jams

When a document jams while it passes through the ADF
(Automatic Document Feeder), “[Document Jam]” appears on
the display.

Remove the remaining documents from the ADF.

Pull the jammed document gently out of the ADF and skip
to step 5.

If there is any resistance and the document does not move
when you pull it, continue to the next step.

Open the control panel by gripping its top and pulling on it.

Pull the document gently out of the ADF and close the
control panel.

Load the documents back into the ADF.

OTE

: To prevent document jams, do not use thick, thin or mixed

documents.

Summary of Contents for LF215





































































































































































































Search results

Summary of Contents for LF215

Reviews:

Related manuals for LF215

Brands by name

Popular brands

Lanier LF215, Operating Instructions Manual

Search results

Summary of Contents for LF215

Reviews:

Related manuals for LF215

Brands by name

Popular brands